QUICKLAB • 1,200 GPD • RO/DI
Choose the 275 Plus when the 1,200 GPD size fits your lab but your application needs RO/DI Type II/III water rather than RO alone.
QuickLab 275 Plus combines 1.25 GPM reverse-osmosis production with a 250 gal storage tank, 12 GPM distribution pump rated at 50 PSI, and PLC/HMI controls. The model is specified for ASTM Type III water.
RO/DI for ASTM Type III water.
Storage, pump and return-loop monitoring.
System operation and water-quality visibility.
System performance, water requirements and installation connections.
The source labels a value in MΩ-cm as “Conductivity”; confirm the intended electrical-quality specification with PPT. TOC units are reproduced as printed.
Pump performance depends on the installed distribution loop.
Allow installation and maintenance clearance beyond the published equipment footprint.
QuickLab 275 Plus combines treatment with storage, UV, final filtration and loop monitoring. Pretreatment is selected around incoming water quality; the final connections follow the selected specification.
Primary treatment of preconditioned feedwater.
Plus treatment for the published ASTM Type III water.
250 gal tank and 12 GPM distribution pump.
QuickLab family installation detail. Treatment summary is conceptual; final stage order, connections and pretreatment follow the selected model and feedwater requirements.
Resolve your water requirements, utilities and access before ordering.
Confirm that the published ASTM Type III designation meets your application and any instrument requirements.
RO make-up and distribution pump flow are different ratings. Review your daily use and peak draws against 1.25 GPM RO make-up, 250 gal storage and the distribution pump rating. Plan your loop around your use points.
Bring your feedwater analysis and your proposed utility connections. Check your water chemistry, power, pressure and drainage against the selected model sheet.
Published dimensions describe the equipment. Allow additional installation and service space; review your access route, tank position and clearance for filters, UV and controls.
Plan filters, UV upkeep, sanitization and service intervals around your installed configuration and actual use.
Keep your model information and documentation available for service, troubleshooting and replacement parts.
Compare RO production and water quality separately from distribution flow.
Compare all QuickLab configurationsSend your required water quality, daily use, peak draws and feedwater analysis. Include available plans so PPT can review this configuration before procurement.
